The automatic feeding equipment is composed of silo, feeding line, power system, acontrol system, etc. The power box is started, and the motor drives the feeding line to run in the pipeline, finally back to the silo. 




Open a feeding orifice in the pipeline above each trough, when the feeding line drives the feed in the silo to run to the position of the feeding orifice in the pipeline, the feed will follow the feeding. The pipe goes down to the trough. There is a sensor in the last trough, when the last trough is full, the sensor will transmit the information to the control system, the control system will cut off the power supply, and the power box will stop, the work and feeding process is completed.




This equipment has been used in many large pig farms for many years and has been recognized by the majority of users. It not only saves a lot of labor, but also enables the pigs in the whole house to eat at the same time, especially for pregnant sow. The feeding line transports the feed into the dispenser, the dispener can be fed quantitatively according to the different physiological conditions of each sow. After the feed reaches each dispenser, the feeding system is activated, the pens of the pig house are unloaded at the same time, and the sows start to eat at the same time.Not only reduces the noise caused by the sow's eager eating and screaming, but the most important is to reduce stress reaction. Precise feeding can also increase the number of litters and improve breeding efficiency.